Nitrogen

A OX Welding Supply Company Inc.

Nitrogen

FULL PRESCRIBING INFORMATION

NITROGEN, Refrigerated Liquid NF
UN1977
NON-FLAMMABLE GAS 2

ALWAYS KEEP CONTAINER IN UPRIGHT POSITION
DO NOT CHANGE OR FORCE FIT CONNECTIONS.
RX ONLY

WARNING: Administration of nitrogen may be hazardous or contraindicated. For use by or under the supervision of a licensed practitioner who is experienced in the use and administration of Nitrogen and is familiar with the indications, effects, dosages, methods, and frequency and duration of administration, and with the hazards, contraindications and side effects, and the precautions to be taken.
WARNING: EXTREMELY COLD LIQUID AND GAS UNDER PRESSURE.
CAN CAUSE RAPID SUFFOCATION.
CAN CAUSE SEVERE FROSTBITE.
Store and use with adequate ventilation.
Do not get liquid in eyes, on skin or clothing.
For liquid withdrawal, wear face shield and gloves.
Do not drop. Use hand truck for container movement.
Cylinter temperature should not exceed 52oC(125oF).
Close valve after each use and when empty.
Use a back flow preventive device in the piping.
Use in accordance with Material Safety Data Sheet (MSDS).

FIRST AID: IF INHALED, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician.

IN CASE OF FROSTBITE, obtain medical treatment immediately.

CAS: 7727-37-9

CONTENTS LTRS: CU FT:
DO NOT REMOVE THIS LABEL.

A-OX WELDING SUPPLY CO.

SIOUX FALLS WATERTOWN HURON MITCHELL YANKTON

NITROGEN, COMPRESSED NF

UN 1066

NON-FLAMMABLE GAS 2

Rx only. WARNING: Administration of Nitrogen my be hazardous or contraindicated. For use only by or under the supervision of a licensed practitioner who is experienced in the use and administration of Nitrogen and is familiar with the indications, effects, dosages, methods, and frequency and duration of administration, and with the hazards, contraindications and side effects and the precautions to be taken.

CAUTION: HIGH PRESSURE GAS. CAN CAUSE RAPID SUFFOCATION.

Store and use with adequate ventilation. Use with equipment rated for cylinder pressure. Use a back flow preventive device in the piping. Cylinder temperature should not exceed 52 degrees C (125 degrees F). Close valve after each use and when empty. Use in accordance with the Material Safety Data Sheet (MSDS).

FIRST AID: IF INHALED, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give Oxygen. Call a physician. CAS 7727-37-9

DO NOT REMOVE THIS PRODUCT LABEL

A-OX WELDING SUPPLY CO.

SIOUX FALLS WATERTOWN HURON MATICHELL YANKTON

CONTENTS: LTRS CU FT