NITROUS OXIDE

Blue Water Industrial Products, Inc.
Blue Water Industrial Products, Inc.

FULL PRESCRIBING INFORMATION: CONTENTS*

• NITROUS OXIDE USP LABEL
• NITROUS OXIDE USP LABEL
• GENERAL WARNINGS AND PRECAUTIONS

FULL PRESCRIBING INFORMATION

NITROUS OXIDE USP LABEL

NITROUS OXIDE USP UN 1070

Rx ONLY

NON-FLAMMABLE GAS - 2 OXIDIZER - 5.1

First Aid: IF INHALED, remove to fresh air.  If not breathing, give artificial respiration.  If breathing is difficult, give oxygen.  Call a physician.

In case of Frostbite, obtain medical treatment immediately

DO NOT REMOVE THIS PRODUCT LABEL

CAS 10024-97-2

47736 (R 06/06)

NITROUS OXIDE USP LABEL

NITROUS OXIDE USP UN 1070

Rx ONLY

NON-FLAMMABLE GAS - 2 OXIDIZER - 5.1

First Aid: IF INHALED, remove to fresh air.  If not breathing, give artificial respiration.  If breathing is difficult, give oxygen.  Call a physician.

In case of Frostbite, obtain medical treatment immediately

DO NOT REMOVE THIS PRODUCT LABEL

CAS 10024-97-2

34436 (R 04/05)

GENERAL WARNINGS AND PRECAUTIONS

WARNING: Administration of Nitrous Oxide may be hazardous or contraindicated.  For use only by or under the supervision of a licensed practitioner
who is experienced in the use and administration of Nitrous Oxide, and is familiar with the indications, effects, dosages, methods, and frequency and duration of administration, and with the hazards, contraindications and side effects and the precautions to be taken.

WARNING:        HIGH PRESSURE OXIDIZING LIQUID AND GAS.  

                      VIGOROUSLY ACCELERATES COMBUSTION.  

                      CAN CAUSE RAPID SUFFOCATION.

                      CAN CAUSE ANESTHETIC EFFECTS.  

                       MAY CAUSE FROSTBITE.


Avoid breathing gas.  Store and use with adequate ventilation.  Keep oil and grease away.  Use only with equipment cleaned for oxygen and rated
for cylinder pressure.  Do not get liquid in eyes, on skin, or clothing. Cylinder temperature should not exceed 52 C (125 F)  Open valve slowly.  Close valve
after each use and when empty.  Use a back flow preventive device in the piping.  Use in accordance with the Material Safety Data Sheet (MSDS)